Sign in Failure *solved* #21
The text was updated successfully, but these errors were encountered:
that’s gone away now but it fails to connect to the internet when its loaded so can’t load any of my online designs. Its fedora 34 on a Lenovo Yoga C740
Hi, had the same problem.
Have you tried installing
winehttp
With winetricks in your environment?
This and the command:
sudo setcap cap_net_raw+epi /usr/bin/wine-preloader
Did the trick for me 🙂
I hope this helps 🙂
No, I have only installed Fedora 34 again on my system and after the installation I have activated the Nvidia-Repository.
Then I have installed the newest driver and install Autodesk Fusion 360 with my
That’s not a good idea! 😉
. even if it worked for you.
@Judoguy12 Can you check, if you can see these DLL’s: #14 (comment)
[Software\Wine\DllOverrides] 1621409851
#time=1d74c81d3a74d04
«*winhttp»=»native,builtin»
this is all I have
Okay, if I got that right, then you must run this command:
/.fusion360 sh winetricks corefonts vcrun2017 msxml4 win10
So you get all DLL‘s! ��
/.fusion360 sh winetricks corefonts vcrun2017 msxml4 win10 — You are receiving this because you were mentioned. Reply to this email directly, [view it on GitHub](#21 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/AHE6JJLK4BD4ER3L7WN5DMDTOQRL7ANCNFSM45DO46RQ).
The best way is you start all over again! 🙂
The first one you check if your system is up to date!
Then you do this steps here:
When you have done that, you remove all these things into your Downloads folder: fusion360-install.sh, winetricks and fusion360 (folder).
Also you must remove the folder «fusion360» into your home folder and uninstall wine!
When you can’t see this folder, then you must activate the option «show all hidden files» into your file-browser.
Fusion 360 Sign in Failure Error
When you get Fusion 360 Sign in Failure error, you won’t be able to reach the area to get access to Fusion 360. As a result you cannot open the program and work on it in no way. There may be various causes for the below issues. However, the solution that I will explain would be helpful for the problem.
# Fusion 360 access error
# Fusion is not opening
You can follow the path given below. But be patient, you will see that it works.
My Computer > C folder > Users > xx (go to the user folder) > AppData > Local > Autodesk > Web Services
Just follow this path and open the folder. You will see a file named LoginState.xml probably at the bottom of the folder. Now you should directly delete this file. This is all you should do. Then you can try opening Fusion 360 again. If it is not still opening and giving the same warning;
Go to Settings of your computer and check if the time and language settings are correct.
As you can see above, make sure that set automatically options are on. Now try to open the program again. If you cannot open the program again, then source of the problem would be different.
How to Find Other Solutions for Fusion 360 Sign in Failure Error?
To detect the problem exactly and to find a complete solution for it, you can check for it in the Autodesk Forum page. Also you can enter your issue to the forum. You will surely get an answer.
If you need to re-install Fusion 360 Student Version, you can follow this link . You can visit the website and make the installation. A critical warning is, if you want to install the student version, you should get your account confirmed. If you won’t use it for commercial purposes, you can prefer the student version.
Lastly, I advise you to check the other articles on the blog about Fusion 360.
Fusion 360 sign in failure что делать
The text was updated successfully, but these errors were encountered:
Judoguy12 commented May 19, 2021
that’s gone away now but it fails to connect to the internet when its loaded so can’t load any of my online designs. Its fedora 34 on a Lenovo Yoga C740
lord-x-type commented May 19, 2021
Hi, had the same problem.
Have you tried installing
winehttp
With winetricks in your environment?
This and the command:
sudo setcap cap_net_raw+epi /usr/bin/wine-preloader
Did the trick for me ��
I hope this helps ��
cryinkfly commented May 19, 2021 •
No, I have only installed Fedora 34 again on my system and after the installation I have activated the Nvidia-Repository.
Then I have installed the newest driver and install Autodesk Fusion 360 with my
That’s not a good idea! ��
. even if it worked for you.
cryinkfly commented May 19, 2021
@Judoguy12 Can you check, if you can see these DLL’s: #14 (comment)
Judoguy12 commented May 19, 2021
[Software\Wine\DllOverrides] 1621409851
#time=1d74c81d3a74d04
«*winhttp»=»native,builtin»
this is all I have
cryinkfly commented May 19, 2021 •
Okay, if I got that right, then you must run this command:
/.fusion360 sh winetricks corefonts vcrun2017 msxml4 win10
/.fusion360 sh winetricks corefonts vcrun2017 msxml4 win10 — You are receiving this because you were mentioned. Reply to this email directly, [view it on GitHub](#21 (comment)), or [unsubscribe](https://github.com/notifications/unsubscribe-auth/AHE6JJLK4BD4ER3L7WN5DMDTOQRL7ANCNFSM45DO46RQ).
cryinkfly commented May 20, 2021
The best way is you start all over again! ��
The first one you check if your system is up to date!
Then you do this steps here:
When you have done that, you remove all these things into your Downloads folder: fusion360-install.sh, winetricks and fusion360 (folder).
Also you must remove the folder «fusion360» into your home folder and uninstall wine!
When you can’t see this folder, then you must activate the option «show all hidden files» into your file-browser.
Fusion 360 Sign in Failure Error
When you get Fusion 360 Sign in Failure error, you won’t be able to reach the area to get access to Fusion 360. As a result you cannot open the program and work on it in no way. There may be various causes for the below issues. However, the solution that I will explain would be helpful for the problem.
# Fusion 360 access error
# Fusion is not opening
You can follow the path given below. But be patient, you will see that it works.
My Computer > C folder > Users > xx (go to the user folder) > AppData > Local > Autodesk > Web Services
Just follow this path and open the folder. You will see a file named LoginState.xml probably at the bottom of the folder. Now you should directly delete this file. This is all you should do. Then you can try opening Fusion 360 again. If it is not still opening and giving the same warning;
Go to Settings of your computer and check if the time and language settings are correct.
As you can see above, make sure that set automatically options are on. Now try to open the program again. If you cannot open the program again, then source of the problem would be different.
How to Find Other Solutions for Fusion 360 Sign in Failure Error?
To detect the problem exactly and to find a complete solution for it, you can check for it in the Autodesk Forum page. Also you can enter your issue to the forum. You will surely get an answer.
If you need to re-install Fusion 360 Student Version, you can follow this link . You can visit the website and make the installation. A critical warning is, if you want to install the student version, you should get your account confirmed. If you won’t use it for commercial purposes, you can prefer the student version.
Lastly, I advise you to check the other articles on the blog about Fusion 360.
Не подскажите . ситуация такая на компьютере стоит фьюжин поставил его на ноутбук,
без задней мысли прописал логин, пароль . и при запуске ошибка sign in failure, и я уже сейчас понял что лицензия предполагает использование только на одном ПК но я теперь логаут сделать не могу чтобы залогиниться другим пользователем. нет вариантов сбросить ему логин, кроме как удалять и заново ставить?
2 ответов
ставить можно на сколько угодно компьютеров. и попеременно на них работать
странно. значит видать ошибка связана не с этим хммм ну я уже удалил его, сейчас заново переставлю и введу другого юзера.
Как получить лицензию Fusion 360
Autodesk Fusion 360 – современный и мощный инструмент для 3D моделирования, по своим возможностям не уступающий Solidworks, а местами в разы более удобный в использовании. На этой странице раньше была инструкция по получению “студенческой” лицензии, но к счастью Autodesk сделали абсолютно бесплатную версию Fusion 360 для “хоббистов”. Она естественно имеет ряд ограничений по сравнению с платной версией, но ограничения касаются в основном функций для серьёзного проектирования и производства. Доступны все основные инструменты 3D моделирования, ограничено использование CAM (для станков с ЧПУ), ограничены размеры PCB проектов (печатных плат), количество чертежей и активных онлайн-проектов. В общем работать более чем можно.
Как получить лицензию Fusion 360
Autodesk Fusion 360 – современный и мощный инструмент для 3D моделирования, по своим возможностям не уступающий Solidworks, а местами в разы более удобный в использовании. На этой странице раньше была инструкция по получению “студенческой” лицензии, но к счастью Autodesk сделали абсолютно бесплатную версию Fusion 360 для “хоббистов”. Она естественно имеет ряд ограничений по сравнению с платной версией, но ограничения касаются в основном функций для серьёзного проектирования и производства. Доступны все основные инструменты 3D моделирования, ограничено использование CAM (для станков с ЧПУ), ограничены размеры PCB проектов (печатных плат), количество чертежей и активных онлайн-проектов. В общем работать более чем можно.