PARAM VISIONS
Now, let us look into some of the FAQs regarding wall putty, to gain some basic understanding & knowledge.
1. What is wall putty in construction?
The main function of wall putty is to fill the voids, pores, and cracks that are formed over the plastered wall surface and to provide a smooth leveled surface finish for the painting work.
To know in detail about white cement, go through the article ��
2. What is wall putty made of?
White cement wall putty is made of white cement blended with polymers, minerals, and filler materials. They are manufactured in powder form.
Acrylic wall putty is made of styrene-acrylic binder as the main ingredient blended with emulsions and fillers and is manufactured in paste form.
3. What is the purpose of applying wall putty?
When we plaster the wall surface with cement mortar, the resulting wall surface contains undulations,micro-cracks, tiny pores, etc. If you paint such plastered walls directly, you may not get the smooth, shiny, and royal finish for the finished painting work.
Wall putty takes care of all these drawbacks by smoothening the wall surface by filling the pores and uneven wall surface area. Wall putty also helps in enhancing the life cycle of the paint by controlling the dampness and seepage of water.
4. What are the top 5 wall putty brands in India?
The top 5 wall putty brands in India are,
1. Birla white wall care putty.
2. JK wall putty.
3. Asian paints wall putty.
4. Berger wall putty.
5. Dr. FIXIT wall putty.
5. How many types of wall putty are there?
Wall putty is broadly divided into two main types.
1. White cement wall putty:
It is formulated by blending white cement, polymer, and minerals to achieve good binding properties. White cement wall putty gives bright, smooth, and superior wall finishes to the wall surface. They are available in powder form.
White cement wall putty can be used for interior walls, exterior walls, and ceilings.
2. Acrylic wall putty.
It is made of acrylic resins with polymers and fillers to provide a smooth, shiny, and lustrous wall finish. Acrylic wall putty is a water-based ready-to-use type material.
Acrylic wall putty can be used only for interior walls and ceilings.
Go through the article ��
6. Is wall putty necessary before painting?
The answer is YES & also NO! �� .
If you want to have a good surface finish for your wall, that gives a smooth and aesthetic look after the completion of painting work, you should definitely go for the wall putty. The application of the wall putty gives good coverage for the paints, by thinning out the material, thus saving your money.
But it is not mandatory to apply wall putty for the painting works, as you can achieve somewhat similar results with POP punning and primer coats.
All these different types of wall finishing materials have their own advantages & disadvantages, so you have to select the one that fits within your regional climatic conditions.
7. What are the advantages & disadvantages of wall putty?
1. Provides a good base for painting work.
2. Covers all the undulations of the plastered wall surface.
3. Fills the cracks, pores, and dents of the wall.
4. Helps in controlling seepage and dampness
5. Gives a shiny, smooth, and rich look to the painted surface.
6. Aesthetic and royal look to the painted home interior and exterior.
7. Gives a good surface area coverage for the painting work.
8. Helps in increasing the life cycle of the applied paint.
9. As it is moisture resistant it does not flake easily.
1. Requires skilled labor to create a desired wall putty surface finish.
2. Once hardened you cannot reuse them.
3. Needs a mechanical stirrer for proper mixing of white cement putty.
4. You cannot use them in all geographical locations as the applied paint gets peeled off in highly damp and moist conditions.
To go through all types of building materials used in construction, click here .
Thank you for going through this article ❤ . Have a good day �� .
All About Wall Putty | What Is Wall Putty | What Is Wall Putty Used For | Disadvantages of Wall Putty | Types of Wall Putty
Wall putty is basically a substance which is applied to the internal wall of any house to increase the beauty and longevity of the house. Wall putty makes a strong base for painting and it also highlights the colour. It provides sharp and beautiful edges for our house.
Wall putty is basically a cement-type substance which is applied to create an even surface of the wall. It also uses a filler material which is used to fill pores, cracks, undulation in walls, etc.
If you increase the lifespan of paint, then you must apply 1 or 2 coats of wall putty. If there are no major wall cracks, then putty will be provided through the whole wall surface but final touches do not require at this step.
Generally, wall putty has a high plasticity property and the texture of wall putty is near about similar to the clay. Wall putty naturally provides a protective layer for the painting. Wall putty is available in the market in different colors and it can be applied on the new wall as well as the old wall.
What Is Wall Putty Used For?
Wall putty is generally used to create a smooth surface of the wall. It also creates a protective layer. The tensile strength and adhesion power are wall putty are adorable. Sometimes, cracks are formed on the wall, then wall putty is used to fill those cracks easily. Here, it acts as a filler material.
Wall putty creates an excellent bonding with the plastered wall surface and the wall paint also gets a very good surface. Wall putty is also used to resist the decaying of walls because it becomes water resistant, abrasion resistant and flake resistant.
Types of Wall Putty
There are various types of wall putty are available in the market according to the purposes, those are in the following below-
1. White Cement Based Putty
White cement-based putty is a very popular type of putty which are used in modern days. White cement based is basically a mixture of white cement, polymers, and minerals. This type of putty is used for both interior wall and exterior wall purposes but this is good for internal purposes usage.
White cement-based putty provides a smooth and glossy finish to the wall surface. White cement-based putty cost is reasonable and most of the people can afford it.
White cement-based putty does not require any kind of skilled labor, so the labour charge is also not very high. Properties of white cement-based wall putty- This type of putty is good to use on exterior surfaces or interior surfaces or exposed surfaces. White cement-based putty is a cement-based putty which gives a strong binding property.
It has an excellent water-resistant property, which also resists dampness. The tensile is also good because of the adhesion property of cement and undoubtedly compressive strength.
2. Acrylic Putty
Acrylic putty is another type of wall putty which is water-based wall putty. Acrylic wall putty is a mixture of acrylic emulsion medium, pigments, and other additives. Acrylic putty is only used for interior wall purposes and it is not used for exterior wall purposes. Acrylic putty provides you with a smooth surface finish which comes matte in nature.
Some special features of acrylic putty are following below- It is only used in an internal portion of the house because if use acrylic putty is in the exterior portion then extra heat will create some problems with the acrylic putty.
The binding property of acrylic putty is less than white cement-based putty. Acrylic putty is not good enough to resist the water totally and due to this water, wears inn the putty arrives, then we need a quick repair in every year.
The strength of acrylic putty is not so much effective and it is good to resist alkali problems. Acrylic putty is suitable for all kinds of paints, which provides a better choice for buyers. The installation charges are also reasonable, that’s why everyone can afford this type of putty.
What Is Wall Putty Made Of?
Wall putty is a mixture of material which is made of different ingredients like calcium carbonate power, which presents in maximum quantity; after that, some amount of sierozem powder is there.
Besides those materials, white cement is also there and a negligible amount of HPMC and ultramarine are also present. Wall can be used for both interior and exterior walls, where wall putty is used as a protective layer.
Application of Wall Putty
Wall putty can be applied for both interior and exterior purposes. The application process of wall putty is different for different wall surfaces, that are-
Step 1: Apply After Primer
When you are going to apply putty on the wall then you need to be sure that the wall must be free from any type of dust, grease, wallpaper, stains, oil paints, etc. If cracks are observed on the wall surface then those must be filled with putty then the next process will start.
Putty must be applied after drying the primer coat. It creates a defensive layer to the putty. One or two coats of putty can be applied but make sure that you can apply a second coat only after drying the first coat.
Step 2: Check The Surface Before You Apply
A surface groundwork checking is necessary before applying a coat of putty. Workers must wear safety because of avoiding dust and dirt. The required tools for putty works are a knife, sandpaper, paint scraper, sanding block, cloth, brush, and water. Those are the major ingredients but some other minor tools are also required besides this.
Step 3: Remove The Loose Materials From Walls
If cracks are found on the wall then it is very important to check this, dig out, and remove the loose materials from that portion. You can use a screwdriver for this action.
Use sandpaper to remove all flakes and dust particles. Make sure that the surface must be freed from dirt, dust, grease, etc. For a lime coating wall, use a sandpaper or paint scraper and for an oil paint wall, use sanding.
Step 4: Final Application
According to the place or purpose, the wall putty is chosen. To make a thick paste, you need to add adequate water to the mixture and use a mechanical stirrer.
The paste is very prone to dry, so you need to be quick enough (use within 2 to 3 hours). We are using a wet or moist cloth to cover the putty paste to resist drying. Use a flat finish tool for applying the putty and the wall must be cleaned.
Disadvantages of Wall Putty
Wall putty is a very modern material which is widely used in recent times because it has some advantages. But it also has some disadvantages also, those are the following-
- Wall cracks are easily visible in wall putty walls because it is a smooth and even wall surfaces, so cracks can easily be detected.
- Wall putty creates a smooth and even surface to the whole wall but it is so much difficult to maintain the whole wall as smooth and even because it is not a machinery process. finishes are different in nature because there are so many types of wall finishes are available in the market. So, it is so much difficult to apply the wall putty over all types of wall finishes.
- Another disadvantage of wall putty is it takes so much effort for cleaning and an unskilled person can not do this because there is a high chance of getting damaged wall putty.
Mixing of Wall Putty
Mixing of wall putty is not a very difficult thing. To prepare wall putty paste you need a bucket and some amount of water. The mixing ratio must be 2:1; so, 2 parts of wall putty and 1 part of the water are needed. After that stir those materials thoroughly. After that apply the putty with a flat tool.
White Cement Based Wall Putty
White cement-based wall putty is a special type of wall putty which is widely used on interior walls and exterior walls. White cement-based wall putty is used as putty, sealer material, or filler material because different additives are mixed with it to do such actions.
In white cement-based wall putty, polymers, minerals, and white cement are also mixed. The cost of this type of putty is not so much high, that’s why almost everyone can afford it easily.
White cement-based wall putty does not require any skilled labor; so, the labor cost of this material is also low.
Drywall Putty
Joint compound, also called drywall compound, is a putty that has the consistency of plaster and is designed for larger jobs. Joint compound is made by mixing gypsum dust and water into a paste. It usually comes in a pre-mixed container for your convenience and is commonly used for taping and finishing drywall seams.
Wall Putty for Holes
Product is not only wall putty to fill holes but, also is perfect for plaster repair on rare wall plaster. Simply apply in circular motion, wipe with a damp cloth, then paint.
Drywall Repair Putty
Use a putty knife to fill them with spackling or wall joint compound. Allow the area to dry, then sand lightly. Anything larger must be covered with a bridging material for strength before the patching compound can be applied.
Filling Nail Holes in Drywall
Here, the following steps of filling nail holes in drywall are as.
- Apply Spackle: Using the sharp corner of your putty knife, scoop out a tiny amount of spackle and gently push it into the hole.
- Let Spackle Dry: Allow the spackle to dry. To be safe, give it at least two hours to set.
- Sand the Spackled Area: After the spackle is dry, sand it down with your fine-grit sandpaper. The goal is to get the spackle to be completely flush with the wall.
- Paint: Once you’re happy with the end result of your spackling efforts you can get to work painting the area. Use a small paintbrush so that you can carefully control where the paint goes.
Wall Putty to Fill Holes
Erase-A-Hole Wall Repair Putty is a quick and easy solution to fill the holes in your walls. Whether you are conquering a DIY project or moving and need to fill the holes left behind from artwork. Maybe you are renting and want to get your deposit back. Erase-A-Hole makes things easy with no tools needed.
Types of Wall Putty
- White Cement Wall Putty: White cement wall putty. Made up of white cement, added polymers and minerals. Used for both interior and exterior applications. Has superior binding traits because it is white cement-based.
- Acrylic Wall Putty: An acrylic and water-based solution. Suitable only for interiors. Binding quality is inferior to white cement alternative
Exterior Wall Putty
Give your walls a great foundation with Trucare Wall Putty – a white cement-based putty that is packed with functional additives. It helps give interior and exterior rough plasters an even finish along with proving to be a great undercoat adhesion to emulsion paints.
Wall Putty for Wood
This wall putty can be applied to interior walls and wooden surfaces. The putty can be used on plastered walls, concrete, brickwork, and asbestos. Since it is an undercoat, acrylic putty is available only in white shade.
Wall putty что это
Wall Putty is essentially a white cement-based powder obtained from white cement used to apply to the walls to even out the surface before painting. It also provides extra life to the paint while smoothing and providing extra shine. A minimum of two coats of wall putty are recommended for effective results. Wall putty also serves as a filling agent to cover cracks, patches, pores, and undulated surfaces on the walls.
Wall putty can be used on both wet as well as dry walls and interior as well as exterior walls as its primary purpose is that of being a protective agent. The wall putty is designed in a manner that can be applied to any type of wall, even while just renovating the home. The first coat is applied to fill any uneven surface on the wall while the second coat ensures appropriate smoothness and finishing before proceeding for paint.
Types of Wall Putty
White cement wall putty
White cement-based wall putty is the most frequently used wall putty for internal as well as external walls. It is made up of white cement, polymers, and minerals and leaves a smooth and sleek finish. It offers excellent binding as it is cement based and acts as a great resistant to dampness. It has superior tensile adhesion, compression, and bending strength. Additionally, it offers great workability and prevents the growth of algae and fungi. White cement wall putty requires comparatively minimal maintenance as well as less paint due to low absorption. It is non-toxic, durable, and works well with all types of paints.
Acrylic Wall Putty
Acrylic wall putty is water based and made with white pigments, acrylic emulsion medium, and additives. Acrylic wall putty is well-suited for internal applications only and offers smooth and matte finish. Its binding properties are lower than that of white cement-based putty. It subsides comparatively quicker and requires to be re-applied every year. It provides good alkali resistance but lower strength and water resistance capability. Acrylic wall putty is suitable for all kinds of paints and dries up faster which reduces the labor time.
Advantages of Wall Putty
- Smooth surface for walls – As discussed above, wall putty improves the texture of walls by filling cracks, pores, and undulations. When applied properly, it provides superior adhesive to the base concrete or plastered surfaces. This makes it ideal for external as well as internal applications.
- Improves life of the paint – Wall putty extends the life of the paints by serving as a protective agent. It resists the growth of bacteria or fungus on walls, thereby shielding it from external hazards. It also makes wall water and flake resistant, further strengthening them.
- Multi-purpose use – Wall putty can be applied to both interior and exterior walls and provides a host of benefits making it fit for multi-purpose use. It provides safety to the wall and increases the life of paint applied on it. Wall putty prevents rapid wearing-off, provides resistance from water and fungal growth, etc.
Final Words: Most often people regard paint as one of the important aspects while doing their home. However, little awareness and some efforts go a long way in making the right decisions. Wall putty is one such element that must be chosen and applied appropriately to your walls which will reap greater results in the long run.
Wall Putty: Prolong the Life of Paint of your Home!
If you want to give a new and fresh look to your house, painting is the absolutely right way to change the ambiance of your house. Doing painting at right interval of time will keep your house refresh and new. However,
Is it just paint or there are some other things that make your paint finish better?
Yes, it is a wall putty which makes your painting shine, makes it strong and saves cost, too. When it comes to perfect finish, wall putty is important prior to paint application. So, before you start, it is necessary to know about wall putty.
Let’s first understand, what is wall putty and why it is necessary for your house painting.
Wall Putty
In general, wall putty is nothing but the materials with high plasticity which are similar in the texture of clay or dough. It provides a protective smooth base for paint application. It also acts as a sealer or filler as you can fill cracks or any patches on the wall. It allows all types of colours to be applied over the walls. Putty comes in different colours and consistency. The good thing about wall putty is that it can be easily used on both exterior as well as interior surface whether it is old or new.
Purpose of Wall Putty Before Paint Application
Even after applying expensive paint, your wall may look uneven. This uneven surface needs to be filled with putty. Following problems or defects can be hidden using wall putty:
- Hair cracks and pin holes on walls
- Dampness on wall
- Uneven and rough cement plaster on the wall
- Cracking due to the ageing of walls
- Discolored patches
There are other defects that may visible on the wall and we have written detailed article on it.
The above defects make your home walls ugly, dull and uneven. Therefore, first identify all these problems on your wall before you start the painting of your house. Application of wall putty before the paint application helps you to achieve smooth, leveled, finished and stunning surfaces for all types of paint. The surface finishing, if uneven due to defective plaster will get improved.
Procedure for Applying Putty on Wall
Follow the steps below for applying putty on wall:
- Before you start applying putty on wall, make sure the surface is clean and dry. The surface should be free from dust, loose particles, or any other contamination. Remove this loose particle using sandpaper or wire brush.
- Mix the wall putty in a pan and add water as per manufacturer’s instructions. Stir continuously by hand or an electric putty mixer for about 10-15 minutes till it gets a creamy, paste-like consistency.
- Apply one coat of primer before applying putty on wall. Then apply the first coat of putty from bottom to top manner with the help of putty knife or spatula. Allow it to dry for a minimum 6 to 8 hours.
- After the first cost of putty get dried, apply a second coat of putty and dry it for hours. Once the putty dries completely, remove unevenness with the help of sandpaper.
We have also written a detailed article on how to apply wall putty?
Different Types of Wall Putty
There are various types of wall putty available in the market based on different purposes such as for interior and exterior walls. Basically, wall putty is differentiated into two types:
01. White Cement Putty
White cement putty is the most popular type of wall putty used nowadays. It is made by a mixture of white cement, mineral and polymers. White cement putty is ideal for indoor as well as outdoor walls. It comes in a smooth and glossy finish. For other detailed information of white cement putty, refer our article on it.
02. Acrylic Putty
Acrylic putty is a water-based wall putty which is made by white pigments, extenders, acrylic emulsion medium and additives. It is mostly used in interior surface and not on the exterior surfaces. Acrylic wall putty has a smooth and matt finish. We have also written an article on acrylic wall putty.
Thickness of Wall Putty
The total thickness of two coats of putty should be maximum 1.5 mm. Uneven thickness due to the unskilled application may cause problems.
Coverage Area of Wall Putty
The coverage capacity of wall putty depends upon the porosity and texture of the original surface. The average coverage capacity of wall putty approximately ranges from 20 to 25 kg/sq.ft/2 coats or 2 to 2.5 kg/sq mt/2 coats.
Packs Available
The putty is available in packs of 1kg, 5kg, 20kg, 40kg, etc. in HDPE bags or plastic container.
Applying Putty on Wall will Save the Cost of Painting
Wall putty is an ideal base for concrete or cement plastered walls and ceilings. It provides water resistant quality. As the wall putty application provides a smooth surface for paint, it increases the paint’s covering capacity. Therefore, applying putty on wall will reduce the consumption of paint and overall cost of painting and it will also increase the life of the paint. It also allows expensive paint to last several years. Hence, it will definitely save the cost of painting.
Popular Manufacturer of Wall Putty
Following are the popular manufacturer of wall putty in India:
Birla White Putty
J K Cement Putty
Berger Paint
Asian Paints
Nerolac Paint
Dulux Paint
These are the important points that you should know about wall putty. Now that you have all the information you need, evenly painted walls are within your reach!