How can I display the grub during boot?
So, I had a dual boot and just nuked the windows partitions, and then got rid of the boot files for windows and updated the grub, and now my PC boots directly into ubuntu. However, I’d like to still have the grub option so I can switch between kernels, and I want to make it permanent.
I’ve read about the matter and what I found was advice to comment the following line out of the grub file:
However, there is no such line in the file, which sole content is:
What does this mean? Should I instead comment out the GRUB_TIMEOUT_STYLE=hidden line, or what?
How to Hide Grub Boot Menu in Ubuntu 20.04, 21.10 (Updated)
You can do the job easily via Grub-Customizer (available in Ubuntu Software) under General Settings tab. However, you need to also disable “look for other operating systems” option.
Any time you want to show the Grub menu, press ESC while booting up will NO longer show dual-boot (multi-boot) systems other than Ubuntu.
NOT OK with Grub-Customizer settings? Re-enable “show menu” and “look for other operating systems” options, save changes, and do following steps one by one.
Hide boot menu by manually editing the config file:
In most Linux including Ubuntu, you can edit the /etc/default/grub file along with scripts under /etc/grub.d to control how the Grub boot menu works.
1.) Firstly, open terminal from system app launcher. Run command to edit the configuration file:
For Ubuntu flavors / Linux Mint, replace gedit with your favorite text editor.
When the file opens, you need to set following lines:
- GRUB_TIMEOUT_STYLE=hidden – Hide the boot menu. Though it still wait a few seconds you set by GRUB_TIMEOUT.
- GRUB_TIMEOUT_STYLE=countdown – Hide boot menu and show countdown. Even set GRUB_TIMEOUT=0. It counts 3,2,1.
- GRUB_TIMEOUT = 0 – It will boot the default OS immediately. However, you may set it to 3 or 5 so you can press ESC (F4 or hold Shift) during the time to show the boot menu if need.
- GRUB_DISABLE_OS_PROBER=true – Disable “/etc/grub.d/30_os-prober” because it overwrite the value of GRUB_TIMEOUT_STYLE. However, it will no longer find other OSes other than Ubuntu.
- GRUB_RECORDFAIL_TIMEOUT=0 – Set timeout if last boot failed. Without the key, it will show and stop at boot menu waiting user action.
2.) Step 1. will do the job after applying changes. However, it will no longer display other operating systems if any in your machine.
In case you want to boot other OS once in a while. Modify 30_os-prober file instead of disable it via “GRUB_DISABLE_OS_PROBER=true”.
To do so, run command:
And set quick_boot=”0″. So it will no longer overwrite “GRUB_TIMEOUT_STYLE” value you set in step 1, while also find other OSes on your machine.
3.) Finally apply changes via command:
How to restore:
Just undo what you did in step 1 and / or 2 and apply change by running command sudo update-grub .
Grub timeout style hidden что это
The program grub-mkconfig (see Invoking grub-mkconfig) generates grub.cfg files suitable for most cases. It is suitable for use when upgrading a distribution, and will discover available kernels and attempt to generate menu entries for them.
grub-mkconfig does have some limitations. While adding extra custom menu entries to the end of the list can be done by editing /etc/grub.d/40_custom or creating /boot/grub/custom.cfg , changing the order of menu entries or changing their titles may require making complex changes to shell scripts stored in /etc/grub.d/ . This may be improved in the future. In the meantime, those who feel that it would be easier to write grub.cfg directly are encouraged to do so (see Booting, and Shell-like scripting), and to disable any system provided by their distribution to automatically run grub-mkconfig .
The file /etc/default/grub controls the operation of grub-mkconfig . It is sourced by a shell script, and so must be valid POSIX shell input; normally, it will just be a sequence of ‘ KEY=value ’ lines, but if the value contains spaces or other special characters then it must be quoted. For example:
Valid keys in /etc/default/grub are as follows:
The default menu entry. This may be a number, in which case it identifies the Nth entry in the generated menu counted from zero, or the title of a menu entry, or the special string ‘ saved ’. Using the id may be useful if you want to set a menu entry as the default even though there may be a variable number of entries before it.
For example, if you have:
then you can make this the default using:
Previously it was documented the way to use entry title. While this still works it’s not recommended since titles often contain unstable device names and may be translated
If you set this to ‘ saved ’, then the default menu entry will be that saved by ‘ GRUB_SAVEDEFAULT ’ or grub-set-default . This relies on the environment block, which may not be available in all situations (see Environment block).
If this option is set to ‘ true ’, then, when an entry is selected, save it as a new default entry for use by future runs of GRUB. This is only useful if ‘ GRUB_DEFAULT=saved ’; it is a separate option because ‘ GRUB_DEFAULT=saved ’ is useful without this option, in conjunction with grub-set-default . Unset by default. This option relies on the environment block, which may not be available in all situations (see Environment block).
Boot the default entry this many seconds after the menu is displayed, unless a key is pressed. The default is ‘ 5 ’. Set to ‘ 0 ’ to boot immediately without displaying the menu, or to ‘ -1 ’ to wait indefinitely.
If ‘ GRUB_TIMEOUT_STYLE ’ is set to ‘ countdown ’ or ‘ hidden ’, the timeout is instead counted before the menu is displayed.
If this option is unset or set to ‘ menu ’, then GRUB will display the menu and then wait for the timeout set by ‘ GRUB_TIMEOUT ’ to expire before booting the default entry. Pressing a key interrupts the timeout.
If this option is set to ‘ countdown ’ or ‘ hidden ’, then, before displaying the menu, GRUB will wait for the timeout set by ‘ GRUB_TIMEOUT ’ to expire. If ESC or F4 are pressed, or SHIFT is held down during that time, it will display the menu and wait for input. If a hotkey associated with a menu entry is pressed, it will boot the associated menu entry immediately. If the timeout expires before either of these happens, it will boot the default entry. In the ‘ countdown ’ case, it will show a one-line indication of the remaining time.
‘ GRUB_DEFAULT_BUTTON ’ ‘ GRUB_TIMEOUT_BUTTON ’ ‘ GRUB_TIMEOUT_STYLE_BUTTON ’ ‘ GRUB_BUTTON_CMOS_ADDRESS ’
Variants of the corresponding variables without the ‘ _BUTTON ’ suffix, used to support vendor-specific power buttons. See Vendor power-on keys.
Set by distributors of GRUB to their identifying name. This is used to generate more informative menu entry titles.
Select the terminal input device. You may select multiple devices here, separated by spaces.
Valid terminal input names depend on the platform, but may include ‘ console ’ (native platform console), ‘ serial ’ (serial terminal), ‘ serial_<port> ’ (serial terminal with explicit port selection), ‘ at_keyboard ’ (PC AT keyboard), or ‘ usb_keyboard ’ (USB keyboard using the HID Boot Protocol, for cases where the firmware does not handle this).
The default is to use the platform’s native terminal input.
Select the terminal output device. You may select multiple devices here, separated by spaces.
Valid terminal output names depend on the platform, but may include ‘ console ’ (native platform console), ‘ serial ’ (serial terminal), ‘ serial_<port> ’ (serial terminal with explicit port selection), ‘ gfxterm ’ (graphics-mode output), ‘ vga_text ’ (VGA text output), ‘ mda_text ’ (MDA text output), ‘ morse ’ (Morse-coding using system beeper) or ‘ spkmodem ’ (simple data protocol using system speaker).
‘ spkmodem ’ is useful when no serial port is available. Connect the output of sending system (where GRUB is running) to line-in of receiving system (usually developer machine). On receiving system compile ‘ spkmodem-recv ’ from ‘ util/spkmodem-recv.c ’ and run:
The default is to use the platform’s native terminal output.
If this option is set, it overrides both ‘ GRUB_TERMINAL_INPUT ’ and ‘ GRUB_TERMINAL_OUTPUT ’ to the same value.
A command to configure the serial port when using the serial console. See serial. Defaults to ‘ serial ’.
Command-line arguments to add to menu entries for the Linux kernel.
Unless ‘ GRUB_DISABLE_RECOVERY ’ is set to ‘ true ’, two menu entries will be generated for each Linux kernel: one default entry and one entry for recovery mode. This option lists command-line arguments to add only to the default menu entry, after those listed in ‘ GRUB_CMDLINE_LINUX ’.
As ‘ GRUB_CMDLINE_LINUX ’ and ‘ GRUB_CMDLINE_LINUX_DEFAULT ’, but for NetBSD.
As ‘ GRUB_CMDLINE_LINUX ’, but for GNU Mach.
The values of these options are passed to Xen hypervisor Xen menu entries, for all respectively normal entries.
The values of these options replace the values of ‘ GRUB_CMDLINE_LINUX ’ and ‘ GRUB_CMDLINE_LINUX_DEFAULT ’ for Linux and Xen menu entries.
List of space-separated early initrd images to be loaded from ‘ /boot ’. This is for loading things like CPU microcode, firmware, ACPI tables, crypto keys, and so on. These early images will be loaded in the order declared, and all will be loaded before the actual functional initrd image.
‘ GRUB_EARLY_INITRD_LINUX_STOCK ’ is for your distribution to declare images that are provided by the distribution. It should not be modified without understanding the consequences. They will be loaded first.
‘ GRUB_EARLY_INITRD_LINUX_CUSTOM ’ is for your custom created images.
The default stock images are as follows, though they may be overridden by your distribution:
Normally, grub-mkconfig will generate menu entries that use universally-unique identifiers (UUIDs) to identify the root filesystem to the Linux kernel, using a ‘ root=UUID=. ’ kernel parameter. This is usually more reliable, but in some cases it may not be appropriate. To disable the use of UUIDs, set this option to ‘ true ’.
If grub-mkconfig cannot identify the root filesystem via its universally-unique indentifier (UUID), grub-mkconfig can use the UUID of the partition containing the filesystem to identify the root filesystem to the Linux kernel via a ‘ root=PARTUUID=. ’ kernel parameter. This is not as reliable as using the filesystem UUID, but is more reliable than using the Linux device names. When ‘ GRUB_DISABLE_LINUX_PARTUUID ’ is set to ‘ false ’, the Linux kernel version must be 2.6.37 (3.10 for systems using the MSDOS partition scheme) or newer. This option defaults to ‘ true ’. To enable the use of partition UUIDs, set this option to ‘ false ’.
If this option is set to ‘ true ’, disable the generation of recovery mode menu entries.
Normally, grub-mkconfig will generate menu entries that use universally-unique identifiers (UUIDs) to identify various filesystems to search for files. This is usually more reliable, but in some cases it may not be appropriate. To disable this use of UUIDs, set this option to ‘ true ’. Setting this option to ‘ true ’, will also set the options ‘ GRUB_DISABLE_LINUX_UUID ’ and ‘ GRUB_DISABLE_LINUX_PARTUUID ’ to ‘ true ’, unless they have been explicilty set to ‘ false ’.
If graphical video support is required, either because the ‘ gfxterm ’ graphical terminal is in use or because ‘ GRUB_GFXPAYLOAD_LINUX ’ is set, then grub-mkconfig will normally load all available GRUB video drivers and use the one most appropriate for your hardware. If you need to override this for some reason, then you can set this option.
After grub-install has been run, the available video drivers are listed in /boot/grub/video.lst .
Set the resolution used on the ‘ gfxterm ’ graphical terminal. Note that you can only use modes which your graphics card supports via VESA BIOS Extensions (VBE), so for example native LCD panel resolutions may not be available. The default is ‘ auto ’, which tries to select a preferred resolution. See gfxmode.
Set a background image for use with the ‘ gfxterm ’ graphical terminal. The value of this option must be a file readable by GRUB at boot time, and it must end with .png , .tga , .jpg , or .jpeg . The image will be scaled if necessary to fit the screen.
Set a theme for use with the ‘ gfxterm ’ graphical terminal.
Set to ‘ text ’ to force the Linux kernel to boot in normal text mode, ‘ keep ’ to preserve the graphics mode set using ‘ GRUB_GFXMODE ’, ‘ width x height ’[‘ x depth ’] to set a particular graphics mode, or a sequence of these separated by commas or semicolons to try several modes in sequence. See gfxpayload.
Depending on your kernel, your distribution, your graphics card, and the phase of the moon, note that using this option may cause GNU/Linux to suffer from various display problems, particularly during the early part of the boot sequence. If you have problems, set this option to ‘ text ’ and GRUB will tell Linux to boot in normal text mode.
The grub-mkconfig has a feature to use the external os-prober program to discover other operating systems installed on the same machine and generate appropriate menu entries for them. It is disabled by default since automatic and silent execution of os-prober , and creating boot entries based on that data, is a potential attack vector. Set this option to ‘ false ’ to enable this feature in the grub-mkconfig command.
List of space-separated FS UUIDs of filesystems to be ignored from os-prober output. For efi chainloaders it’s <UUID>@<EFI FILE>
Normally, grub-mkconfig will generate top level menu entry for the kernel with highest version number and put all other found kernels or alternative menu entries for recovery mode in submenu. For entries returned by os-prober first entry will be put on top level and all others in submenu. If this option is set to ‘ true ’, flat menu with all entries on top level will be generated instead. Changing this option will require changing existing values of ‘ GRUB_DEFAULT ’, ‘ fallback ’ (see fallback) and ‘ default ’ (see default) environment variables as well as saved default entry using grub-set-default and value used with grub-reboot .
If set to ‘ y ’, grub-mkconfig and grub-install will check for encrypted disks and generate additional commands needed to access them during boot. Note that in this case unattended boot is not possible because GRUB will wait for passphrase to unlock encrypted container.
Play a tune on the speaker when GRUB starts. This is particularly useful for users unable to see the screen. The value of this option is passed directly to play.
If this option is set, GRUB will issue a badram command to filter out specified regions of RAM.
This option may be set to a list of GRUB module names separated by spaces. Each module will be loaded as early as possible, at the start of grub.cfg .
The following options are still accepted for compatibility with existing configurations, but have better replacements:
Wait this many seconds before displaying the menu. If ESC or F4 are pressed, or SHIFT is held down during that time, display the menu and wait for input according to ‘ GRUB_TIMEOUT ’. If a hotkey associated with a menu entry is pressed, boot the associated menu entry immediately. If the timeout expires before either of these happens, display the menu for the number of seconds specified in ‘ GRUB_TIMEOUT ’ before booting the default entry.
If you set ‘ GRUB_HIDDEN_TIMEOUT ’, you should also set ‘ GRUB_TIMEOUT=0 ’ so that the menu is not displayed at all unless ESC or F4 are pressed, or SHIFT is held down.
This option is unset by default, and is deprecated in favour of the less confusing ‘ GRUB_TIMEOUT_STYLE=countdown ’ or ‘ GRUB_TIMEOUT_STYLE=hidden ’.
In conjunction with ‘ GRUB_HIDDEN_TIMEOUT ’, set this to ‘ true ’ to suppress the verbose countdown while waiting for a key to be pressed before displaying the menu.
This option is unset by default, and is deprecated in favour of the less confusing ‘ GRUB_TIMEOUT_STYLE=countdown ’.
Variant of ‘ GRUB_HIDDEN_TIMEOUT ’, used to support vendor-specific power buttons. See Vendor power-on keys.
This option is unset by default, and is deprecated in favour of the less confusing ‘ GRUB_TIMEOUT_STYLE=countdown ’ or ‘ GRUB_TIMEOUT_STYLE=hidden ’.
How do I change the GRUB timeout in Linux?
Before starting, if when you boot your computer, GRUB doesn’t show up, jump to the What to do if GRUB menu doesn’t show up section.
Changing GRUB timeout in Linux:
To begin, edit GRUB’s configuration file. You can use the command below to edit it using the nano text editor.
Find the line containing “GRUB TIMEOUT=5” shown in the following screenshot; in my case (Debian), it is the second uncommented line.
This is the line you need to edit to change the GRUB timeout; just replace the default 5 with another value; for example, to change the timeout from 5 seconds to 10 seconds, edit the following line.
And leave it as
Once you edit the line, exit nano saving changes by pressing Ctrl+X and update-grub to apply changes, to update Grub, run the command below.
Now when you reboot your computer, you’ll see the new timeout.
What to do if the GRUB menu doesn’t show up:
If the GRUB menu doesn’t show up when you boot your computer, it may be hidden. If you are using Legacy BIOS, you can display it by pressing the Shift key several times when booting. If you use UEFI, then press Esc. This will show the GRUB menu one time.
In my Ubuntu device, when checking GRUB’s configuration file /etc/default/grub, an additional line hides the GRUB menu. To show GRUB’s menu permanently, the following line:
Must be changed as shown in the screenshot below to:
Then, you can edit the previously mentioned line to change the timeout. For example, to change the timeout from 5 seconds to 10 seconds, edit the following line.
And change it to:
Then close nano saving changes (Ctrl+X).
Now you need GRUB to apply the changes you made. For this, you need to update GRUB. To update GRUB, run the following command.
When you reboot, the GRUB menu will stay for 10 seconds, or the number you defined in the line containing GRUB_TIMEOUT=.
As you can see, now GRUB gives 10 seconds to choose an option or boot automatically.
What is GRUB, and how it works:
GRUB (Grand Unified Bootloader) is a bootloader that allows the user to choose the kernel, OS, or boot mode. Since the BIOS does not recognize file systems, this task is passed to the bootloader, which loads the files into RAM.
Grub is the first program that runs when the user turns on his computer. The bootloader task is to boot the correct operating system or kernel previous to system initialization.
In this case, the bootloader, or GRUB, is located in the MBR (Master Boot Record). The MBR is a hard disk or partition sector containing information on file systems and partitions, as well as the bootloader. Grub is also compatible with BSD systems (FreeBSD, NetBSD, OpenBSD); other kernels are supported through chain loading.
Conclusion:
As you can see, any Linux user level can easily edit GRUB’s timeout. Managing GRUB is pretty easy, and the most common mistake is to forget to update it after changes. Other known bootloaders are BURG (Brand-new Universal Loader from GRUB), LILO (Linux Loader), and Syslinux.
I hope this article explaining how to change the GRUB timeout in Linux was useful. Keep following Linux Hint for additional Linux tips and tutorials.
About the author
David Adams
David Adams is a System Admin and writer that is focused on open source technologies, security software, and computer systems.