MiningFamily.org — Форум для Майнеров
Вылетают непонятные ошибки в майнере на 1070
Вылетают непонятные ошибки в майнере на 1070
Сообщение Nidre » Ср июл 07, 2021 12:16 pm
Пользуюсь NiceHash miner.
В общем повысил частоты 1070 по ядру +150, а по памяти +600. И зачастую майнит майнит и вылезает ошибка «Quick-swap DAG to: 000000000. «, после чего хеш с 27,30 +- увеличивается до 30+ на минуту. Это нормально? Ну и температуры карты тоже на пару градусов скачут.
Device #0 HW Error Logged —
Does anyone know what this means? Occurred about 3 times in the past 9 hours. I've checked the logs in the nicehash directory and couldn't find anything. They always occur after a rejected share above target but otherwise everything seems normal. Also, although I didn't capture it in my screencap, 0 Windows Hardware Errors recorded on HWINFO64. Thanks
Nvidia p0 state (in NHM->settings->advanced) made my 3070 throw up these errors (Was a 1080 in that system before). Maybe useful. cheers
I enabled mine and the error disappear.. weird.
can you tell me detail exactly how to fix it up ?
Thanks a lot, sir. I was so lost but now it works and it is100% efficient.
Too high overclock
Thanks, that's what I figured but it seemed to be running well with very little rejected shares and no significant dips in hashrate. I'll drop the mem clocks down for now and do some testing later.
I also get this but only once, each time I start NHM, it throws 1 error and then works fine. I've got 4 TUF Gaming 3070 OC's in the rig and it's always the same device number that throws the error — weird
I’m getting this on a 2080ti, I am using the extreme option on nicehash for my gpu.
On MSI afterburner detach the graphs down in the bottom and scroll down to the one that says temp limit. If it says 1, your ram is overheating. It's a problem with my 3090 FE and some lower end 3080's like the gigabyte's.
Yeah, my temp limit metric says 0 and HWINFO64 shows that my has the value "no" for the thermal performance limit so I should be good with the memory temps on my gpu. That is the biggest issue I had previously with mining on a 3080. I've had to leave my side panel off so that I wouldn't hit the thermal limit even though core temps were in the 50's. I even thought about doing the thermal pad mod from Igor's Lab. From what I understand the 3090 stacks memory on both sides of the PCB making the issue worse.